電線恒溫吊重試驗機符合標準：

1. GB 2099.1-2008 家用和類似用途插頭插座 第1部分：通用要求

2. UL 817-2009 軟線組件和電源軟線

電線恒溫吊重試驗機規(guī)格參數：

1. 儀器型號：SZ-6806

2. 內箱尺寸：W500×D500×H600mm

3. 溫度范圍：常溫～200℃

4. 試驗砝碼：10lb×12

5. 老化方式：熱風循環(huán)式

6. 計時器設定：0～6Hr

7. 主機尺寸：W770×D750×H118mm

8. 主機重量：185kg

9. 電源要求：1∮ AC220V2A

電線恒溫吊重試驗機英文版：

Constant Temperature Hoisting Tester

Model: SZ-6806

Specimen of an attachment plug or current tap molded to a length of cord no more than 6 inches long is to have a line scribed on the both sides the device. Blades are positioned downward through a hole in a 1/4-inch thick steel plate mounted horizontally within an air circulating oven that has been heated to60℃,A weight with 10 lbf is attached to each of the individual line blades. Have the temperature of oven increase an maintain at60℃for 4 hours; after that remove the specimen to enable it cooling down to room temperature. The displacement of the blades from there original position should not exceed 1/16 inch.

Ⅰ Test Standard:

1. GB 2099.1-2008 家用和類似用途插頭插座 第1部分：通用要求

2. UL 817-2009 軟線組件和電源軟線

Ⅱ Specifications:

1. Model: SZ-6806

2. Interior Dimensions: W500×D500×H600mm

3. Temp. Range: Room Temp.～200℃

4. Load Weight:10lb×12

5. Aging Method: Hot-air circulation

6. Timer: 0～6Hr

7. Dimension: W770×D750×H118mm

8. Weight:185kg